As with all things painted, car paint too begins to lose its shine and gain color as the years pass. Wind, snow, heat and other forms of wear, contamination, scratches, bird droppings etc are the reasons for your car that looks old and damaged over time. But if you're keen to restore its lost luster and making it look presentable again, there are ways to do it.
first step to take is to thoroughly clean the car. Wash it with soap, if necessary and make sure that every nook and corner of the car is free from dirt and impurities. Next is to scrape away the top layer of oxidized paint from the car, what can be done with the help of foam compounding pad. Once you are through with this you will find a cloudy view of the surface of the car. To eliminate this vagueness outside the body, you have to polish the car, but before you start, you must ensure that the polish you use is mild.
to get a great look back again, you need to polish with a circular polisher and the white foam polishing pads can give you the best results. Give the finishing touch to the car using the orbital polishing start slowly and then steadily increasing pace. Take a small patch and gradually go forward. If you want to paint your car you will need to put on a layer of primer.
before adding a coat of paint in your car, you have to work out how you are going to be about. It is always advisable to use a spray gun to get the right texture paint a car if you want your car to look shiny and smooth. If you think you can manage to paint the car yourself, you will save costs that are incurred if it is done professionally. standard spray gun with pressure 70psi can do a wonderful job, but anything below that will give you a thick coat soiled.
Many of the paint companies give instructions on what kind of spray gun that should be used for a specific color, which may include some fluid tip and air cap. Therefore, it is advisable to spray gun is purchased from paint shop only.
must know the ratio of contact or thinner you need to be added to the colors youintend use . Once you got the right ratio, you can pour it in the gun ready for use. Aim the nozzle in the right direction and lightly spray coats until the desired effect is obtained.
0 comments:
Post a Comment